Hallo Jan,
"formpassend" mache ich entsprechende Teile auch vorher. Aber Dein Bild liess mich wirklich viel mehr vermuten :)... Das sieht schon gar nicht mehr nach mal gerade eben aus! Also als Verformer hast Du eine Eins!
heribert
Hallo Jan,
"formpassend" mache ich entsprechende Teile auch vorher. Aber Dein Bild liess mich wirklich viel mehr vermuten :)... Das sieht schon gar nicht mehr nach mal gerade eben aus! Also als Verformer hast Du eine Eins!
heribert
Dann bin ich jetzt der "Bender" !?
Apropos Bender, wo ist eigentlich dein Bender abgeblieben ?
Gruß
Martin
Keine Ahnung, der war nicht von mir. Den hatte jemand in meine Galerie vom Futurama-Headquarter geposted. Das war von mir.
Gruß
Jan
Ups, sorry.
Hallo Leute,
ich habe mit grade mal Gedanken zur Verglasung des Bugscheinwerfers der Comet gemacht. Hierbei handelt es sich im Grunde um einen parabelförmigen Rotationskörper, also dachte ich mir, da kann man doch schnell und einfach ein Tiefziehwerkzeug für machen. Aber halt. In dem Maßstab muss sowas auch einfacher gehen. Schnell mal einen Kreis eingepasst, und siehe da, man kann die Form ebensogut mit einer 5mm Kugel und einem 10mm Loch hinbekommen. Der Plan: Eine Kugellagerkugel auf einen Stab kleben. Eine Platte mit 10mm Loch herstellen. Darauf etwas Kunstofffolie befestigen und warmmachen. Dann mit dem Werkzeug vorsichtig die Form in die Folie drücken. Da bin ich aber mal gespannt, muss nur noch eine passende Kugel finden.
Gruß
Jan
Hi Folks,
just had some thoughts about how to make the glassing for the front landing light. Thats basically just a parabolic body. I thought, thats easy to make a tool with that shape. But wait! On that scale there's got to be an easier way. Checked right quick, the shape can be approximated with a 5mm circle. Now the plan: Take a 5mm ball from a bearing and glue it on a rod. Make a plate with a 10mm hole in it. Fasten some appropriate plastic sheeting to the plate and make it warm. Gently press the tool into the hole to get the shape. I am eager to see if it works. Just need to find a matching ball.
Regards
Jan
Hallo Leute,
also der nächste Ausdruck ist fertig und ich habe wieder von vorne angefangen zu bauen. Diesmal möchte ich alle Details mitbauen. Also hier eine Ansicht des Cockpits, das ich letztes Mal schändlicherweise übergangen habe.
Gruß
Jan
:usenglish:
Hi folks,
the next printout is ready and I started to build all over again. This time I wanna include all the details. Here is a view of the cockpit I left out last time.
Regards
Jan
Hallo Leute,
so die Cockptsektion ist fertig. Man beachte das Handrad vom Einziehfahrwerk, die zwei Kompasse und die hinteren Instrumente 8)
Gruß
Jan
:usenglish:
Hi folks,
the cockpitsection is done. Please note the handwheel for the landing gear, the two compasses and the rear instruments. 8)
Regards
Jan
Das ist ja klasse Detail! Du solltest Deinen eigenen Verlag aufmachen!
Gruß
Oliver
Ich kann mich meinem Vorredner nur anschliessen...
Herzliche Gruesse,
Matthias
Hallo Jan,
Spitzenmässig!!!! Nicht nur sehr schöne "Verformungen" sondern auch glänzende Details!
Wie ich letzthin schon erwähnte: Du hast es drauf!
Mach weiter so, dann ist Deutschland um einen sehr guten Nicht-Schiffskonstrukteur reicher!
Viele Grüße
heribert