Posts by Dustin Basler

Fantastischt!!!

Excellent craftmanship, sir! I will be following your build with much interest!

Very nice!

Gorgeous build!! Great recovery from the dropped fuselage, and the carved spats look awesome!

A very impressive build so far Yu! One of the best Maly builds I have every seen.

Yes...punching all of the rivets is quite tiring. I feel the burn more in my wrist than in my forearm. My progress would be much much faster was I not punching all the rivets. I'll sit down and punch rivets for 5 minutes, get bored, and decide to come back to the model later.

To punch the rivets I'm just using a dead ball point pen. As a surface I'm using a plastic kitchen cutting board. It's a fairly hard surface and allows me to push quite hard without punching all the way through the paper.

I've spent quite a bit of time working on my model recently, but visually there isn't much to show for it. I hoping that progress with move a little faster once the wings are done. The only really boring repetitive part left will be the engine, and I have yet to decide how overboard I want to go on engine detail.

Now that I have part of the wings in place, I am extremely happy with how the rivets are looking. It's hard to capture in a photo, but here I'm trying to show the contrast between punched and not punched rivets.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2409.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2410.jpg]

Wheel well details

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2414.jpg]

I did run into a few adjustments that needed to be made with the wings. First, everything "inside" the wing skin fit just fine within the cardboard wing frame. However, the blue wingtip rib, which is only used when making folded wingtips, came flush to the edge of the wing skin. It needed to be sunk into the skin about 1mm to leave room for the blue border. In the picture below I've already trimmed off a bit of the wingframe cardboard and pushed the blue rib back so that it is properly aligned.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2418.jpg]

Everything else lined up pretty well.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2419.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2420.jpg]

I'm thinking this is builder error. I'll patch the problem with some acrylic paint and hopefully make it "go away".

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2421.jpg]

Now we come to the second issue I ran into with the folded wingtips. The part 2fP and 2fL have "male nobs" as they should. However, 2P and 2L do not have "female notches" to accept them. The actual wing skins have the notches like they should. I simply had to glue 2P and 2L to the wing skin first, and then cut the necessary notches.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2422.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2407.jpg]

Things are starting to take shape!! The second half of the wing should move a little faster now that I know exactly what I'm doing.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2424.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2425.jpg]

Great job Ricardo. Overall the model looks great, but you've done an especially nice job on the little details. It takes true skill to cut such small pieces so neatly and accurately.

Looks great so far Dave. I look forward to watching the sneak peak for this kit before it hits shelves.

And while I can't speak for everyone, I've personally never found only speaking English to be a problem on this forum. Most of these nice German gentlemen are much smarter than lazy American's like me who only know a single language. At least you know Spanish and English Dave. That's a one-up on me. Maybe if I take a few more semesters of German in college...

I look forward to your next update.

That's absolutely beautiful work Yu! I can't wait to see how much extra realism the finishing touches will bring to your work.

A rather small and boring update, but at least progress has been made. I started to make the wings. Punching all the rivets into the wing took FOREVER, but I'm pleased with the appearance. I've already detached the wingtips so that I can make them movable. The kit allows for you to make them in the stationary up position, but I'm planning to hinge mine so that they can be folded or extended.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2403.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2404.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2405.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2406.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/wings/100_2407.jpg]

I've finished the cockpit. Now it's time to start skinning.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0041.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0042.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0046.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0049.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0050.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0051.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0053.jpg]

Wow!! Both models are looking great...but that engine is especially stunning! It's kind of ironic that it's not the Halinski model with the engine.

I'm ALMOST done with the cockpit. In fact I may finish it later tonight, so another update will be coming soon. My sister is taking a photography class at her high school and the school provides a very very nice digital camera with an adjustable lens and all of that. I was lucky enough to be able to use it for these pictures. It has a bit of a learning curve, but I think I was eventually able to get some good shots with it.

The pictures really say it all. The left wall of the cockpit is done. The right wall is almost done. I've started depressing all of the rivet marks and panel lines with a dead ball-point pen. So far the rivets are creating a very subtle effect which is exactly what I was going for. I didn't want my model to look like it had the chicken pox. In my opinion it's just enough detail without being distracting.

On a different note, I'm taking my first German class this semester. So, maybe in another year or so I'll be able to post in German.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0002.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0009.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0012.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0014.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0019.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0025.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0033.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0038.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0008.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0006.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/DSC_0007.jpg]

Wow this cockpit looks VERY similar to Halinski's A6M2 Zero cockpit. You're doing a great job so far!

Oh so after 9 pages of leading us on, you finally come clean. You've been taking pictures of a real Comet, and all the background tools and equipment were just photoshoped in. It's ok I forgive you.

But honestly it looks great Leif.

Thanks Norm!

@Leif,
I guess the lack of glue is just pure luck, or perhaps it's just not showing up because I don't use a flash. I haven't coated the paper in anything. I just cut it out as it comes and start building. Though I think it would be wise to start coating my models with something just to preserve them for years to come.

Thanks for the comments guys. Here's another small update. I had to use the lesser of the two available cameras for this set of pictures. Hopefully next update the better camera will be available again and I'll be able to get another set of good closeups.

I've finished the tanks behind the pilots seat. From pictures that I've seen of the cockpit, the kit's tanks aren't very accurate. My building of them also got to be a bit sloppy. But oh well, these details will be almost entirely hidden when I close the cockpit.

I've started work on the left wall of the cockpit. I added a wire which I attempted to crimp and then painted black to replicated the chain in the picture below.

[Blocked Image: http://img.photobucket.com/alb…inski%20Zero/pic5_web.jpg]

This photo is from http://rwebs.net/avhistory/history/Zeke32.htm. I THINK this wheel and chain device is the elevator trim adjuster. Regardless of what it really is, the real plane had it and so does mine.

Beyond that I've been working on a "box" that goes on the left wall. Again, I don't know what this box does. As far as I know, the radio equipment went on the right wall of the cockpit, so this box's function eludes me. But, I still have a few photos showing that it had on/off toggle switches, and below that it had three black bulb like turn knobs. I'm replicating the toggle switches from small pieces of copper wire which will be painted silver, and the bulb knobs will be built up from glue drops and painted black.

The other pictures just show other little do-dads that go in the cockpit like the fuel mixture adjuster on the tip of my finger.

[Blocked Image: http://img.photobucket.com/alb…inski%20Zero/100_2291.jpg]

[Blocked Image: http://img.photobucket.com/alb…inski%20Zero/100_2289.jpg]

[Blocked Image: http://img.photobucket.com/alb…inski%20Zero/100_2288.jpg]

[Blocked Image: http://img.photobucket.com/alb…inski%20Zero/100_2290.jpg]

Hopefully another update will come soon!

Roland,
Great looking cockpit!

I would love to build the sunderland, but not quite yet. I'm still afraid that I'll mess it up.

Yes, a very lovely machine gun!

Wow Roland! This will be quite the project and quite the bird when your finished. I really look forward to following your progress, as it may help me get up the courage to one day cut into my own copy of the Sunderland.

Thank you Leif. You're always an excellent source for resources. I had forgotten that you had done this detailing to your P-39, so I will have to search and refind your thread to use as a guide. Just by seeing that photo I completely agree with your method. Now I'll just have to find or make something suitable for the job.

Also, that website that you found containing photos of transport B-24s was great. I especially liked some of the photos depicting the aircraft being built and worked on. It looks like women helped a lot.

I can't wait to watch this build. This kit has been on my wish list for awhile now. The P-40 had been my favorite since I was a child. I think I was enticed by the tiger shark teeth more than anything else.

They're both looking great JC! Despite this being my first post, I've been following your thread from the beginning. I'll continue to watch your progress with much interest. I can't wait to see these two birds side by side.

I should have posted my references in my original post, but I forgot so here they are.

I've been using the following pages as references for this build. The first one contains pictures of the actual plane, and the next links are builds of the model.

http://www.socalvalue.com/airace/zero/zero.htm

http://forum.zealot.com/t145162/

http://www.mothership-fujifum.com/a6m2zero-sub18.html

http://www.kami-mokei.com/kansei/hal061.htm

http://www.kartonwork.pl/forum…t=6647&highlight=zero

http://www.cardarmy.ru/gallery/avia/zero-hal.htm

The last link shows the model repainted to match that of a zero that would have flown in the Pearl Harbor attack. It turned out quite nicely, but I don't have the patients to repaint my model.

Here's a small update. I did get some pictures with a slightly better camera this time. I'll reshow the seat and the seatbelt so that some of the details are crisper. I noticed a few areas where the foil in the seatbelts was glinting in the photos, so I'll have to go over those with some more paint. I've added the bungie cord and the rest of the seat adjustment mechanism to the bulkhead behind the seat. I've started working on the compressed air and hydraulic cylinders behind the seat.

Hopefully this cockpit will be done shortly so that I can finally start building the rest of the plane. I decided last night that I'm going to attempt to give the model more depth by depressing the panel lines and making the by making the rivets stick out. I basically plan to score the panel lines and poke the rivet marks from behind with an inkless ball-point pen. We'll see how it turns out I guess.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9902-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9903-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9904-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9905-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9906-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9907-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9908-1.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9909.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9910.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9911.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9912.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9913.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/CIMG9914.jpg]

Models in and of themselves. Looking good Leif.

Of course pilots had engine troubles while they were flying. You've simply created an even more realistic model then you would have had with two identical engines. Your work looks great by the way. You've crammed quite a bit of "stuff" into those engine bulkheads, but it all looks very neat...not messy or sloppy at all. You obviously spent some time planning this well.

And not to be nosy, but those drawers in the background don't by any chance store some future projects of the planes that are pictured on them do they? I would love to see what you can do with a B-24, and there happens to be what looks like a B-24 drawing in the background.

This looks like a very fun build. I think a nice gloss or maybe semi-gloss coating would nicely bring out the vibrant colors of this bird. The wing riggings will add a lot too, especially at this small scale.

Thanks guys.

You're probably right Mike, but I'm one of those lunatic people who gets joy out of knowing a detail is there, regardless of whether or not it can be seen.

Leif-
College seems like a big waste of time for me thus far. I'm at a big state school with way to much bureaucracy. I really don't know exactly what I want to do career wise. I've had a job and been paying for my own stuff since I was 14, so work ethic isn't really a problem. I just think most degrees, besides a very specialized degree like law, engineering, or medicine, is a big was of time...more of a piece of paper that people put on their job resume than anything. We'll see what happens I guess. Maybe I'll find a nice job restoring cars that actually pays a livable salary.

Dansl-
Yes I've already spent some time contemplating the engine. You're right, it does look painfully repetitive, but somehow I want to find enough patience to make it as detailed as possible. It would be great if my engine turned out the way xalex's P-47 engine did.

Nice to see your back to work on this beautiful bird. I know I've said it before, but I still want to build a plane in 1/16 scale. Your large birds are just extremely impressive. I may have to give the Judy that you rescaled to 1/16 a try after I finish the zero I'm working on, though I'll probably leave lighting and motors out of the picture.

Please keep us updated Leif. Your crisp photos and detailed write-ups are always a joy to view.

I decided to finally show some pictures of the Zero that I have been working on for several months now. I've been at college and haven't had a digital camera until now. Being at college also means that my progress has been fairly slow.

I'd say I'm at about the halfway point for the cockpit. I still need to add the walls which include all the radio equipment, and gunsight, and a few other details. I made the seatbelts from layered aluminum foil painted with acrylic paint. I punched buckle holes in the right lap belt, but they didn't show up in the picture. This is actually the first model that I have used acrylic paints to paint the edges instead of water colors. I already greatly prefer acrylic to water colors. Acrylics are thicker and fill in the gaps much nicer. I also think that it's faster to match acrylic shades than it is to match water colors.

I also tried to cover the gauges in super glue to give them a "glassy" effect, but it didn't turn out as well as I had hoped. I might go back over them with clear finger nail polish. I hate having a flush instrument panel and normally I would outline each gauge with small painted wires, but the zero instrument panel has the gauges mounted from behind and they are pretty much flush with the panel.

I was tempted to cut out the holes in the seat back, but I decided I didn't want to risk destroying my model. Now I sorta wish that I had cut them out, because I think it would make the seat look much more realistic.

I'll try to borrow my sisters camera and try to get some crisper pictures later. Updates will likely be slow, but there should be at least some progress while I'm on Christmas break for the next month. Enjoy.

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/100_2254.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/100_2255.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/100_2256.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/100_2257.jpg]

[Blocked Image: http://img.photobucket.com/albums/v443/bfam4t6/Halinski%20Zero/100_2258.jpg]

Beautiful and clean build Robson. You built that kit very quickly. You are a very skilled modeler!

Gorgeous engine sir! I look forward to seeing more of your nicely built details. You might say I'm a detail addict.

Thanks for the beautiful pictures of a real Jak, but when do we get to see your model?

Very clean and precise model!! Thanks for sharing the crisp photos!

Brilliant!!
Thank you for continuing to share your work with all of us!

Thanks Michael!

Hours of sanding very well spent my friend!

That's a nicely built plane. Did you make the cockpit yourself or did you order it? It looks very neat. Sorry I don't speak German.

Beautiful!!!

This is a great build JC! I love viewing any of the Halinski builds. You are certainly a clean and precise builder, and you're making this kit look excellent. I may have to add it to my collection when I make my next large order from Poland.

I'll continue to enjoy your progress through your very neat pictures.

Dustin