Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

1

Mittwoch, 7. Dezember 2016, 22:56

PT-91 Twardy 1:16 GPM

Hello guys!

Starting a new build is always great :)

This is a huge build...and a big monster of a tank.
Starting with some frames
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

2

Dienstag, 13. Dezember 2016, 18:38

So the build have started....
With buildgroup1 the hull. I did of course get the laserparts for this model :) and it seems like the partsfit is very good here. Havent been able to find english instructions for this model...so I make it in a slow pace with a lot of research....but there seems to be very few builds out there of this model.
Ok..enough said, on to the build. A lot of frames here, and I did some custom stiffeners to assure a 90degree angle between the formers.

Top and bottom view


And a side view.


Next will be the drivers department :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

3

Mittwoch, 14. Dezember 2016, 19:30

Hello guys!

Started to make the cockpit. Many small parts in this buildgroup....So I only managed to do the right side in one evening..

The drawing and the main layout of the cockpit


Main part scored and cutted and almost all parts for the right handside is ready. Some levers and adjustmentpin to go


Enjoying :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

4

Donnerstag, 15. Dezember 2016, 21:39

Started mounting the different parts on the right side in the cabin, and also started making the pedal arrangement on the floor.



And the fire extinguisher
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

5

Mittwoch, 21. Dezember 2016, 18:27

Started skinning the hull. Biggest skin I ever did :)

also placed formers for the shafts


progress with the drivers cab


closeup of the floor and placed into the hull


the driver is waiting :)


next update next year.....Wish you all a merry christmas!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

6

Freitag, 6. Januar 2017, 19:00

Hello! happy new year to all of you :)

Drivers cabin is done..a lot of work for almost nothing since the inside will nearly be visible through the drivers hatch..


Plenty of details inside the cabin


Continued skinning the beast...


The fit of the skin is not the best I have seen...but its good enough with some help with trimming and paint..


The front part. A lot of parts and details on this side of the tank...Also started to build up the underside of the hull. The shafts and other parts.


Rear and the front plate that will be stuffed with parts...


The front plate...and the drawing



Mounted...and the driver in place :)


Next update in about 14 days :)
Taking a trip to my house in spain next week :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Draccus (09.01.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

7

Donnerstag, 19. Januar 2017, 21:36

Wheels...
Had to try to make one of the roadwheels. Oh my...what a timeconsuming job it was on this model. Used about 4 hours to make half a wheel :)
It contains a lot of parts as you can see of the drawing.


Its a lot of nice details. Also did some weathering...or accident if you like :)


This kit is really a massive one, and will take some time to finish :)
But as I see it..the pleasure with this hobby is so great that the time does not count.
So lets continue with the wheels..


Im not used to this type of drawings so I use a bit of time to study parts and drawings...And have not found any buildreports of this kit that are much helpful..so I struggle on :)


More next week :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es haben bereits 2 registrierte Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

ReSzAT80 (20.01.2017), Helmut B. (26.01.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

8

Donnerstag, 26. Januar 2017, 21:04

The testbuild of the wheel is finished...Each wheel contains 54 parts...will do a more pictured build of the wheels later :)
But all in all I think it came out fairly good :)

"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Helmut B.

Hennings Dino

  • »Helmut B.« ist männlich

Beiträge: 10 505

Registrierungsdatum: 30. Dezember 2004

Beruf: Jurist

  • Nachricht senden

9

Donnerstag, 26. Januar 2017, 21:22

What a monster !

And a fine and interesting build, Josve!

Go ahead! :)
Bis die Tage...

Helmut

"Einmal sah jemand die Häftlingsnummer 78651, die auf meinem Arm eintätowiert ist, und sagte: "Das ist wohl Ihre Garderobennummer?" Danach trug ich jahrelang nur langärmelige Pullover."
In Erinnerung an Simone Veil, † 30. Juni 2017



Im Bau: CAP SAN DIEGO (roko)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

10

Donnerstag, 26. Januar 2017, 22:15

What a monster !

And a fine and interesting build, Josve!

Go ahead! :)


Vielen dank Helmut!
Es ist virklich ein grosses bau :) 60cm lang! So es ist mein schwerigestes bau :)
Viele teile..ich habe de teile nicht zuzammenzâhlen, aber ich frûhe mich uber das bau :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

11

Donnerstag, 26. Januar 2017, 23:03

I have decided to make the tank in several sections. First section to be finished is the underside of the hull.
The part isA bulldozer blade is mounted on the T-72's nose and can be deployed to dig firing positions or clear debris.
Drawing tells me the number of parts is 50..

The drawing


The top side is laminated to 1mm lasercut part :) Just have to say that the laserpackage for this tank is really huge!!! Almost complete covering of 1 and o,5mm parts.
Not very strange it was pricy :)
Another neat thing with this model is the 1:1 drawing. A lot of them :) As you can see here, the finished part is placed on the drawing.


Next was to start making the cylinders. Pretty straight forward building here.


A lot of bulbes or some halftubedshaped parts on the underside

Im not sure what this is for parts...maybe someone can enlighten me??
Managed to delete the picture of the finished parts..will do another soon :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

12

Freitag, 27. Januar 2017, 19:09

Next is the inside of the front mudguards.Not very difficult, but getting it nicely done....is another matter.


Some parts laminater to 1mm laserparts. And did also some preshaping ot the main part :)


Inside of the mudguard and the preshaped part.


The first one in place :)


More next week!
Have a really nice weekend fellow modellers!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

13

Dienstag, 31. Januar 2017, 19:21

Hello guys!

The underside of the hull is done.Timeconsuming work...the detailing is really great on this tank :)
Going to finish the dozerplate and start to make some parts on the sides and back.
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

14

Mittwoch, 1. Februar 2017, 18:02

Finished the dozerplate.

There were of course a lot of parts involved in this buildgroup too..


The final result..


Stau tuned for more :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

15

Donnerstag, 2. Februar 2017, 19:36

Continuing making parts for the side. Since im no expert on tanks..im not sure what this parts are...
But here we go :)
Drawing and some of the parts to be used.


Also had to make some rivets/boltheads. Theese are 1mm in diameter.


Here I have cutted and laminated the parts, plus some of the laserparts. The finished parts placed on the 1:1 drawing.


Then placed on the side. There are 3 such part on each side.




Next will be the upper rollers and some other details :)
More next week!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

16

Donnerstag, 9. Februar 2017, 21:24

Hello modellers!!

Update on the P91 :)

Making of the upper rollers.
First the drawing.
The roller is made of 27 parts all in all with nuts and bolts included


I made the base plate for the roller first. Then cutted all parts ready.
Added some disks and nuts on the plates to make a more realistic look.


So lets get started with the rollers :)
I hope you dont mind going in details on how I do it...maybe you do it otherwise then me, but here are my ways of doing it :)
I always start with painting the edges..and since im colorblind it a challenge :) . I have to take the model with me to the colorstore to have the colors scanned
and then make colors out of that. works fine, but minimum quantity is 0,5 liter of paint..so you can imagine I have A LOT of paint at home :)


After painting the edges, I do some preshaping of the part. Placing the strip in my hand and use a wooden dowel to shape it by rolling it on the part until I have the desired shape.


I roll it so the edges of the cirkle overlap


Then I glue the edges together.


Next is to put the disc in. I put in the front side first, the fit has to be tight, so a bit of sanding is often required.
I found a picture of the real roller,and I could see I had to add some details to it :)


Next is the inner part.
This part is 6mm in diameter.
First shaping with a 2mm copper rod


Roll it so the edges overlap. Then glue the edges together.


Then press the disks in and glue.
The rollers are finished with nuts and bolts, ready for paint.


Placed on the 1:1 drawing


Then I glued it to the tank...maybe not very wise since im sure to break it off when handling the model when the build continues :)


Next will be the base and suspension for the roadwheels.
In the meantime..say hello to Franz krupp :) He is the driver of this tank!
Im not very good in figure painting as you might see, but when he is finished painted im sure he will look good enough for me :)


So until next time...stay sharp!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

ReSzAT80 (10.02.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

17

Mittwoch, 15. Februar 2017, 21:37

Small update...
I worked 2 evenings for theese parts..
Watching Tv and having a good time preparing parts after a long days work :) feels good!!

The base structure to the suspension arms placed on the 1:1 drawing


The finished one...Going to check if I can find an image of the real part and maybe pimp it up a bit :)


So here are the result of two evenings work...


So until next time...stay sharp!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

18

Donnerstag, 23. Februar 2017, 21:57

Not much of an update...but making suspension parts :)
Lot of parts, step by step towards the finish line :)



Until next time....stay sharp :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

19

Sonntag, 12. März 2017, 20:13

Hi guys!!

Continuing in a slow pace....

Making roadwheels...here are the parts for one wheel


Putting together


Suspension in place :)


So until next time...stay sharp!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

busoramas (13.03.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

20

Mittwoch, 22. März 2017, 22:54

hoi!

making mudguards :)



the beast is growing..


stay sharp :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

21

Donnerstag, 23. März 2017, 21:54

Started to make the "boxes" on top of the left mudguard.
Picky work...takes me forever to finish just one of the boxes..
But its fun to build, so im just picking on :)

First the drawing


Next to cut the parts roughly...and start the assembly of the main construction


Cut out the strips...and make the halfpipe construction in a way...


Assembled and started to make the hinges


3 done...3 to go...


parts wating for monday :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

22

Samstag, 25. März 2017, 19:51

Some construction to finish the turret cirkle. Laserparts...



biggus...


so until next time...stay sharp :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

23

Montag, 10. April 2017, 22:46

Working on the front "tiles" and boxes...

first drawing and layout of the tiles



cutting parts..and placing parts






progress...but slooow


so until next time! Have a great easter my friends :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

24

Sonntag, 9. Juli 2017, 15:08

Hello my friends!!
Started on the turret...had to do something else than making small parts for the side boxes...
Turret comes with two options, with or without partial interior.
Abd since I love picky work..guess which option I went for?
Of course the interior option.The interior can only be seen through the open hatches, so thats why its limited to just a small part of it.
Summertime is not the best time of the year to make models..but I make some small progress now and then in days with bad weather :)

Drawing of the turret


Laserparts :) makes it easy to put together


Its a big construction now :)
Also making the boxes along the sides.


stay tuned...more to come next week :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

25

Sonntag, 16. Juli 2017, 18:22

Making the turret interior.To bad it wont be seen very much through the hatches...


First I did the backpeice of the cannon


Then some control panel...


Continuing next week....
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (17.07.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

26

Mittwoch, 19. Juli 2017, 20:22

the interior of the turret is done.


not to much work, ans parts fotted well


next....the main hatch


I dont like theese drawings...


now...4 weeks of vacation :)
see you in august!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (20.07.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

27

Donnerstag, 31. August 2017, 19:53

Slow slow slow...Back from vacation and I have started on the main hatch. But I really find the drawings very difficult to read..so im making very slow progress.
The level of detail is huge on this model, so im really struggeling with both motivation and skills here.
But im fiddeling on and crawl slowly forward.
One of the drawings of the hatch


Main hole :)


Im not sure how many parts there is in this construction, but it will take me weeks to complete it...


So far so good :)


stay tuned :)


I dont like theese drawings...
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (01.09.2017)

busoramas

Anfänger

  • »busoramas« ist männlich

Beiträge: 46

Registrierungsdatum: 26. April 2016

Beruf: Product designer

  • Nachricht senden

28

Freitag, 1. September 2017, 21:00

after this, is the real model working, fantastick job, it took a lot time with details but the finish are awsome
Paúl Sánchez
Product Designer

paulestudios.com/juegos

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

29

Montag, 11. September 2017, 16:25

Working on the hatch...

first the "dustguard" ... of course it could be customized with some kind of cloth in the lower part..but I went for stock parts here :)


The finished part.




And next was the hatch. Here the main drawing


last part of the drawing and the skin


Mounted. now onto adding details :)

"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es haben bereits 2 registrierte Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (12.09.2017), andreask (13.10.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

30

Dienstag, 12. September 2017, 21:34

Here is rest of the main hatch with most of the details in place.







Stay tuned...
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

ReSzAT80 (13.09.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

31

Donnerstag, 21. September 2017, 22:12

ok ok ok...skinning of the turret...it was with a bad feeling I started to skin the tower. The way to do it is unlike anything I have done beforre since there are no flat surfaces here. And the skin are divided in several parts. And of course with me not quite understand polish instructions and the messy drawings I was a bit nervous before starting the process.

Started with the right side and the back.


Next I have to do is to make the barrel, since it has to go into the "hinge" before skinning the left side. The barrel is about 25cm long with a diameter of 12,5mm. Problem is of course to roll such long tube....so I have to come up with a solution of making some kind of inner structure and then put the barrelskin on that...or else im afraid im getting a wrinkled barrel...

Also experimented with the blue opticals...with some ovehead foil and blue spirit pencil. I think the result turned out pretty well :) Please tell me what you think about it!!


Will try this on the rest of the periscopes and the other opticals here and there.
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es hat bereits 1 registrierter Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (22.09.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

32

Mittwoch, 27. September 2017, 21:32

Anyone for barrel :)

Finished the barrel...monsterpiece..32cm long. Longest barrel I ever made!

First the skin is on..had to come up with a solution for something to use as inner structure. So after a lot of searching for something that was 12,5mm in diameter, I found some pencils that matched the criteria. So I wrapped the skin around the pencils (3 stk in a row)


Then it was to make the "adjustable bands" around the barrel. and the coned part in the rear end.


Barrel done..32cm long and 13mm in diameter


Closeups of the bands6


Back and front :)


And mounted on the turret. Rest of the skinning can start :)


Stay tuned :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es haben bereits 3 registrierte Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (28.09.2017), Wolfgang Pesek (28.09.2017), andreask (30.09.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

33

Donnerstag, 28. September 2017, 20:06

Project status :) coming along...
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

34

Donnerstag, 5. Oktober 2017, 23:21

Continue the work with the turret...

Flare system. Need to have some small side projects going on while studying the drawings




Then I got to the point where I had to put the rest of the skin on the turret...and as you can see, its not an easy task to get it to look good :)
The last skin is big..round and not easy to handle, as in where to exact put it...have I cut the right cuts along the side?.
So I was studying and thinking..and then just went for it. Glued it on in a line from front to back, then worked my way outwards. Got it placed and glued in a way that I found satisfying :)



Also made the front covercloth..


Next was the other hatch. Still a lot of detailing to do, but the main structure is done.




Then I started on some optical device...Will finish this part next week :)




Project status :) Im so happy that the turret is skinned...


Stay tuned :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es haben bereits 2 registrierte Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (06.10.2017), ReSzAT80 (09.10.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

35

Donnerstag, 12. Oktober 2017, 23:26

Another device..many parts but enjoyable work :)


And another optical device :) came out pretty well


Also continued working on the second hatch


And started to put the armour on


And current projectstatus :)


stay tuned :)
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Es haben bereits 2 registrierte Benutzer diesen Beitrag mit "Gefällt mir" markiert .

Benutzer, denen dieser Beitrag gefällt:

Schildimann (13.10.2017), busoramas (15.10.2017)

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

36

Freitag, 20. Oktober 2017, 20:27

The second hatch

Hello guys!!
Slowly getting there...with this hatch it was not so many challenges :) good partsfit and construction.
Ok drawings :)
Did replace the periscope with some painted foil, the rest is stock parts.


All hinges works of course :)




Next task is to get the hatch glued to the turret


Next is the outside armour on the turret :)
Stay tuned!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Josve

Profi

  • »Josve« ist männlich
  • »Josve« ist der Autor dieses Themas

Beiträge: 1 103

Registrierungsdatum: 18. November 2005

Beruf: Elektrotekniker

  • Nachricht senden

37

Gestern, 12:43

So I started with the detailing of the turret. First the outside armour.







Have as nice weekend guys!!
"I'LL BE BACK"

Johnny Svensson
PAPIRMODELLER.COM

In the workshop
LeFh 1:16 DrafModel
T28 1:25 DrafModel


Finished builds.

Social Bookmarks